How do I prepare for the Lead Inspection?

(These recommendations do not replace those from Maryland Department of the Environment)

• Look for any chipping, flaking or peeling paint on all interior and exterior surfaces. (Walls, ceiling, windows, trim, doors etc)
• All paint issues must be completely resolved prior to your Visual Inspection.
• Clean surfaces.  use of HEPA Vacuum is recommended for all floors.
• use a soapy detergent and water for cleaning window sills, window wells and floors (in room that don’t have windows) to remove dust.  (Use gloves for extra protection along with a mask appropriate to your location).
• Change water and towel frequently to avoid cross-contamination.
  

  The Visual Inspection:

• An interior and exterior walk-thru looking for chipping, peeling or flaking paint.
• Properties with replacement windows require ONE sample per room from a window sill, window well or floor.
• Properties with non-replacement windows *(windows with painted surfaces) require TWO samples per room.
• One from a window sill or window well and a second one from either the floor or another window sill or well.
  

  After the Inspection:

• The samples are sent to an accredited lab for testing.
• The federal government and the State of Maryland have set guidelines for lead contents in paint.
• You must provide the tracking number to our inspector before we can schedule the inspection.
• Tracking numbers can be obtained from the left top side of your previous certificate or you can get your first one by registering your property with MDE.
• Call MDE at 410-537-4199 to receive your tracking number.  Send by email to leadsafetysolutions@gmail.com or by text to (240) 461-4377.